LIFT-2S, Lift and Hoist Control Cable

LIFT-2S, Lift and Hoist Control Cable

LIFT-2S is usually used as control or feeder cables in the lifts, hoists and ideally install onto the pendant manual control unit. The two steel wire reinforcement act as stress or torsion protection to cable of the control unit of the system.

Cable Construction
• Fine strands of bare copper conductors according to DIN
VDE 0295 class 6 and IEC 60228
• PVC insulation YI3, to DIN VDE 0207 part 4
• Black cores with consecutive white numbering accordance to
DIN VDE 0293
• Green-yellow earth core
• 2 support wires integrated in the outersheath with a breaking
strength of 2100N
• Cores stranded in layers
• Textile wrap as a support braid
• PVC outersheath, YM2 to DIN VDE 0207 part 5, colour black
• PVC self-extinguishing and flame retardant, test met

Technical Data
Standard : According to DIN VDE 0250
Nominal voltage : Uo/U 300/500 V
Temperature range : Flexing : – 5oC to + 40oC
Fixed laying : – 40oC to + 70oC
Max. conductor temp. : Under load : + 70oC
Circuit conditions : + 150oC
Free suspension height : 50 m
Testing voltage : 3 KV, 50 Hz
Min. bending radius : 10 x cable diameter

More info
>> Download LIFT-2S Spec